0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Architectural Simulations on Spatio-Temporal Changes of Settlement Outdoor Thermal Environment in Guanzhong Area, China

Autor(en):


ORCID

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 3, v. 12
Seite(n): 345
DOI: 10.3390/buildings12030345
Abstrakt:

This paper aims to provide data support for rural sustainable development through analyzing the spatio-temporal characteristics of the interactions of the outdoor thermal environment. The ordinary and representative rural settlements in the Guanzhong area were selected to analyze the dynamic process of the rural thermal environment through field measurements and numerical simulations. RMSE (root mean square error) and MAPE (mean absolute percentage) were used to verify the numerical simulation model, and physiological equivalent temperature (PET) was used to evaluate the outdoor thermal environment. Results show that the ENVI-met model reliably predicts the thermal environment of a rural settlement, as the air temperature and relative humidity values range of the RMSE and MAPE were 0.85–1.79 and 2.04–5.11%, respectively. Moreover, the air temperature rose by 3.08% and relative humidity dropped by 4.42% from 2003 to 2018 as the amount of artificial surfaces increased by 35.4% and the PET index gradually increased by 27.43% at daytime and 34.03% at nighttime. Furthermore, trees could improve the outdoor thermal environment significantly, mainly because the average air temperature decreased by 3.6% and relative humidity increased by 8%, and the PET index decreased by 12.4% and 13.1%, respectively, for daytime and nighttime. This case study is representative of rural settlements in the Guanzhong plain, and thus is an appeal to rural planners to pay attention to the thermal environment issues caused by increased artificial underlay surfaces and to focus on trees in rural areas.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10661154
  • Veröffentlicht am:
    23.03.2022
  • Geändert am:
    01.06.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine