0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Numerical Analysis of the Influence of Deep Excavation on Nearby Pile Foundation Building

Autor(en):




Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 11, v. 13
Seite(n): 2842
DOI: 10.3390/buildings13112842
Abstrakt:

In this paper, a numerical simulation is used to establish a three-dimensional model, which considers the height of buildings, the relative position between buildings, and foundation pits. These were studied in detail to investigate the changes in settlement of adjacent buildings and the displacement and internal force of piles caused by deep foundation pit excavation. The results indicate that the number of floors in the building, along with the angle and distance between the building and the excavation pit, have a significant impact on the settlement of the building and the deformation and internal force variation in the piles. For example, when D = 0.1 H, with the increase in the number of floors, the increase in the bending moment of pile 1 at the pile shaft is 62.63 kN·m, and the increase in the bending moment at the pile head is 224.72 kN·m. At this point, the maximum horizontal displacement of the pile shaft occurs at approximately 1.27 H. When θ = 45∘, the maximum difference between the maximum and minimum deformations of the building is 9.71 mm. When D ≤ 1.0 H, the majority of the building is in the primary influence range of surface settlement behind the wall, and the building undergoes a combined deformation of ‘upper convex’ and ‘concave’. When D > 1.0 H, the building predominantly resides in the secondary influence range, and the building undergoes a deformation of ‘upper convex’.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10754271
  • Veröffentlicht am:
    14.01.2024
  • Geändert am:
    07.02.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine