Performance Analysis of Short-Span Simply Supported Bridges for Heavy-Haul Railways with A Novel Prefabricated Strengthening Structure

A novel prefabricated strengthening structure (NPSS) is proposed to improve the vertical stiffness and load-bearing capacity of existing short_span bridges for heavier axle-load trains passing through. The strengthening principle of the NPSS is revealed through theoretical derivation. A refined calculation model is prepared to investigate the effects of two important parameters on the structural behavior of the bridge, including the support stiffness and the installation location of the NPSS. The calculation model is also verified with four-point bending test of a bridge removed from a heavy-haul railway. With the calculation model and the response surface methodology (RSM), the functional relationships among the crucial mechanical indexes of the bridge and the two parameters of the NPSS are methodically established. Thus, the optimal values of the parameters are determined via a multi-objective optimization model and the analysis hierarchy process-fuzzy comprehensive evaluation method. Furthermore, the feasibility of the optimal parameters is appropriately verified based on simulations of the vehicle–track–bridge dynamics. The existence of the NPSS with optimal parameters could enhance the vertical stiffness of the bridge by 21.0% and bearing capacity by 19.5%. In addition, it could reduce the midspan dynamic deflection amplitude by 23.4% and vertical vibration acceleration amplitude of the bridge by 25.2%. The results of the study are expected to contribute to the capacity development and rehabilitation of existing heavy-haul railways with low cost and convenient construction without railway outage.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.