0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

The Utilization of Crushed Corn Cob as a Sand Substitute in Portland Cement Mortars for Sustainable Construction

Autor(en): ORCID
ORCID
ORCID
ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 3, v. 14
Seite(n): 594
DOI: 10.3390/buildings14030594
Abstrakt:

The utilization of mineralized sandy shredded corn cob (SCC) as a partial replacement for fine aggregate in Portland cement mortars (PM) presents an innovative opportunity for sustainable construction and organic waste reutilization. This study aims to assess the impact of SCC, with granulometric variations G1 and G2, on eight mortar formulations (PM, SCC-G1-5%, SCC-G1-10%; SCC-G2-5%, SCC-G2-10%, SCC-G2-15%, SCC-G2-20%, and SCC-G2-30%) with a consistent water-to-cement ratio of 0.55. Fresh-state properties (flowability, temperature, pH, unit weight, and setting time) and hardened-state characteristics (compressive strength at 4, 7, 14, and 28 days) were evaluated. Notably, flowability decreased by 90% for G2 designs with up to 15% SCC, unit weight decreased by up to 12% with SCC-G2-30%, setting time was delayed, and compressive strength for all SCC mortars up to 20% exceeded 21.9 MPa. In conclusion, the partial replacement of sand with a G2 particle_size distribution of SCC is feasible, with an optimal performance observed in SCC-G2-5%.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10773386
  • Veröffentlicht am:
    29.04.2024
  • Geändert am:
    29.04.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine