Smart Materials and Structures - v. 33, n. 4 (März 2024)

Erschienen:	März 2024

Autor(en)	Titel	Seite(n)
Xia, Jiutian / Li, Yuanjing / Fu, Shiling / Xie, Wenhao / Qu, Jingting / Li, Yunquan / Ren, Tao / Yang, Yang / Liu, Hao	3D-printed passive bellow actuator for portable soft wearable robots	045018
Kumar, Sukesh / Yu, Aimin / Khandelwal, Mudrika	Analyzing the structural behavior of conducting polymer actuators and its interdependence with the electrochemical phenomenon	045017
Lu, Jieshan / Zheng, Yuqiao / Zhang, Heyu / Cao, Yongyong	Bayesian approach of elliptical loci and RAPID for damage localization in wind turbine blade	045008
Wang, Chengyu / Wang, Zhigang / Wang, Huitian / Chen, Zhuo / Tian, Yuan / Yang, Yu / Yin, Sha	Customized deformation behavior of morphing wing through reversibly assembled multi-stable metamaterials	045015
Dai, Shenyuan / Hao, Guangbo / Qiu, Lifang	Design and analysis of a contact-aided flexure hinge (CAFH) with variable stiffness	045012
Ji, Minjung / Cho, Younghoi / Lee, Seung-Jae / Park, Keun	Design and analysis of three-dimensional chiral metamaterials for enhanced torsional compliance	045009
Wu, Min / Zhao, Run-Mao / Chen, Jian-Neng / Zheng, Jun-Jie / Shao, Bo-Kai	Design and performance analysis of a flexible-hinged piezoelectric driving dispenser	045014
Moezi, Seyed Alireza / Sedaghati, Ramin / Rakheja, Subhash	Development of a novel nonlinear model and control strategy for soft continuum robots featuring hard magnetoactive elastomers	045025
Li, Henghao / Zhang, Xiaolin / Liang, Weijian / Xiao, Endong / Huang, Wenkai	A differentiable actuator extends potential configurations of modular robots	045005
Wang, Chunhui / Xin, Chaojie / Song, Qihang / Wang, Shuobang / Cheng, Siyi / Shi, Chao / Zhao, Dongyuan / He, Qingyuan / Zhang, Jie / Chen, Xiaoming	Dual-parameter stretchable, transferable mesh piezoresistive sensor for electronic skin detection of strain and temperature changes	045021
Lei, Bingyue / Li, Jiahao / Zhou, Wei / Shou, Mengjie / Zhao, Feng / Liao, Changrong	Dual-stage theoretical model of magnetorheological dampers and experimental verification	045027
Xu, Jiawen / Xia, Dawei / Lai, Zhihui / Chen, Geng / Dai, Wenxing / Wang, Jingxiong / Yang, Hongxin	Experimental study of vibration modes switching based triple frequency-up converting energy harvesting with pre-biased displacement	045035
Wei, Minghai / Lin, Kun / Liu, Junjie	Experimental study on vibration control performance of TMD-STF damper	045010
Li, Xiaozheng / Ma, Yongxian / Wu, Chuang / Wang, Youzhan / Zhou, Shoujun / Gao, Xing / Cao, Chongjing	A fast actuated soft gripper based on shape memory alloy wires	045011
Aboutalebi, Reza / Eshaghi, Mehdi	Flutter analysis of laminated fiber-reinforced magnetorheological elastomer sandwich plate resting on an elastic foundation using an improved first_order shear deformation theory	045026
Duncan, Olly / Bailly, Nicolas / Laird, Katie / Shivkumar, Maitreyi / Bowman, Tom / Goff, John Eric / Scarpa, Fabrizio	Focus on smart materials and structures for sporting protective equipment	040401
Narayanan, P. / Pramanik, R. / Arockiarajan, A.	Hard magnetics and soft materials—a synergy	043001
Liu, Xiaohui / Tao, Yan / Jia, Hexuan / Dai, Fuhong	Harnessing multi-stable piezoelectric systems for enhanced wind energy harvesting	045024
Lan, Xingzi / Chen, Xinyu / Chen, Xin / Fan, Hao / Zheng, Hehui / Wang, Han / Tang, Yadong	High-efficient and intelligent antibacterial face mask integrated with airflow-temperature dual-function sensors for respiratory monitoring and disease prevention	045002
Masana, Ravindra / Dalaq, Ahmed S. / Khazaaleh, Shadi / Daqaq, Mohammed F.	The Kresling origami spring: a review and assessment	043002
Chen, Chung-De / Shen, Yu-Jie / Chou, Ping-Yi / Wang, Po-Hao	A Lamb-wave based SHM for multi-damage localizations in large composite plates by using piezoelectric transducer array	045028
Wang, Jiawen / Zhou, Lilin / Fan, Caizhi	A machine learning-based method for co-design and optimization of microwave-absorbing/load-bearing multifunctional structures	045023
Wu, Lifan / Dong, Xiaomin / Yang, Baolin	Magnetorheological variable stiffness and damping flexible joint with cam working surface for industrial robot	045013
Wang, Jiajin / Xu, Baoguo / Lai, Jianwei / Wang, Xin / Lu, Ye / Hu, Cong / Li, Huijun / Song, Aiguo	Model-based linear control of nonlinear pneumatic soft bending actuators	045022
Gao, Zhiwen / Guo, Juanjuan / Zhang, Yuhao / Zhou, Zhiwen / Zhang, Cennan / Li, Hua / Chen, Bin / Wang, Jizeng	Multilayer modeling framework for analyzing thermo-mechanical properties and responses of twisted and coiled polymer actuators	045031
Shabani, Majid	Numerical and experimental assessment of tilted-helical fiber orientation effects on deformation of pneumatic soft actuators	045034
Cao, Liang / Gong, S. G. / Tao, Y. R. / Duan, S. Y.	Optimizing dispensing performance of needle-type piezoelectric jet dispensers: a novel drive waveform approach	045001
Khazaaleh, Shadi / Dalaq, Ahmed S. / Daqaq, Mohammed F.	An origami-inspired energy absorber	045029
Liu, Xiao-Xiao / Xu, Yang-Bing / Han, Chen / Zhang, Feng	Performance analysis of electrical signal output of multi-state flexoelectric structures with parameter uncertainties through quasi-Monte Carlo method	045019
Mu, Tong / Jia, Fei / Zhao, Wei / Liu, Yanju / Leng, Jinsong	A phase-transition model of reprocessible thermadapt shape memory polymer	045007
Wiener, Thomas / Offenzeller, Christina / Martetschläger, David / Wimmer, David / Spirowski, Thomas / Jakoby, Bernhard	Phenomenological studies on magnetic and mechanical remanence effects in magnetorheological fluids	045004
Huang, Tianxiang / Dong, Tianyu / Yuan, Shenfang	A piecewise inverse finite element method for shape sensing of the morphing wing fishbone	045030
Benhemou, Aya / gibus, david / Huguet, Thomas / Morel, Adrien / Demouron, Quentin / Saint-Martin, Camille / Roux, Émile / Charleux, Ludovic / Badel, Adrien	Predictive lumped model for a tunable bistable piezoelectric energy harvester architecture	045033
Zou, Xuexue / Zhu, Ruijian / Chen, Xing / Ran, Qianping / Wang, Zengmei	PVDF piezoelectric sensor based on solution blow spinning fibers for structural stress/strain health monitoring	045006
Han, Yuhang / Wang, Chensheng / Sun, Lei / Wang, Hongxin / Yang, Bowen / He, Lipeng	Research on a rotary piezoelectric energy harvester based on movable magnets	045020
Cao, Teng / Wen, Zhiyi / Wang, Boquan / Yang, Yaqing / Li, Xiaoniu / Wu, Dawei	Theoretical modeling and experimental investigation of carbon fiber reinforced plastic-based piezoelectric actuator	045032
Peng, Xin / Ma, Chenglong / Yuan, Luhao / Dai, Donghua / Zhu, Dehui / Wu, Meiping	Understanding the role of laser processing parameters and position-dependent heterogeneous elastocaloric effect in laser powder bed fused NiTi thin-walled structures	045003
Pu, Huayan / Liu, Jun / Wang, Min / Ding, Jiheng / Luo, Jun / Sun, Yi	Vibration control of giant electrorheological damper combining nonlinear fractional-order controller and extended state observer	045016

Autor(en)

Titel

Seite(n)

Xia, Jiutian / Li, Yuanjing / Fu, Shiling / Xie, Wenhao / Qu, Jingting / Li, Yunquan / Ren, Tao / Yang, Yang / Liu, Hao

3D-printed passive bellow actuator for portable soft wearable robots

045018

Kumar, Sukesh / Yu, Aimin / Khandelwal, Mudrika

Analyzing the structural behavior of conducting polymer actuators and its interdependence with the electrochemical phenomenon

045017

Lu, Jieshan / Zheng, Yuqiao / Zhang, Heyu / Cao, Yongyong

Bayesian approach of elliptical loci and RAPID for damage localization in wind turbine blade

045008

Wang, Chengyu / Wang, Zhigang / Wang, Huitian / Chen, Zhuo / Tian, Yuan / Yang, Yu / Yin, Sha

Customized deformation behavior of morphing wing through reversibly assembled multi-stable metamaterials

045015

Dai, Shenyuan / Hao, Guangbo / Qiu, Lifang

Design and analysis of a contact-aided flexure hinge (CAFH) with variable stiffness

045012

Ji, Minjung / Cho, Younghoi / Lee, Seung-Jae / Park, Keun

Design and analysis of three-dimensional chiral metamaterials for enhanced torsional compliance

045009

Wu, Min / Zhao, Run-Mao / Chen, Jian-Neng / Zheng, Jun-Jie / Shao, Bo-Kai

Design and performance analysis of a flexible-hinged piezoelectric driving dispenser

045014

Moezi, Seyed Alireza / Sedaghati, Ramin / Rakheja, Subhash

Development of a novel nonlinear model and control strategy for soft continuum robots featuring hard magnetoactive elastomers

045025

Li, Henghao / Zhang, Xiaolin / Liang, Weijian / Xiao, Endong / Huang, Wenkai

A differentiable actuator extends potential configurations of modular robots

045005

Wang, Chunhui / Xin, Chaojie / Song, Qihang / Wang, Shuobang / Cheng, Siyi / Shi, Chao / Zhao, Dongyuan / He, Qingyuan / Zhang, Jie / Chen, Xiaoming

Dual-parameter stretchable, transferable mesh piezoresistive sensor for electronic skin detection of strain and temperature changes

045021

Lei, Bingyue / Li, Jiahao / Zhou, Wei / Shou, Mengjie / Zhao, Feng / Liao, Changrong

Dual-stage theoretical model of magnetorheological dampers and experimental verification

045027

Xu, Jiawen / Xia, Dawei / Lai, Zhihui / Chen, Geng / Dai, Wenxing / Wang, Jingxiong / Yang, Hongxin

Experimental study of vibration modes switching based triple frequency-up converting energy harvesting with pre-biased displacement

045035

Wei, Minghai / Lin, Kun / Liu, Junjie

Experimental study on vibration control performance of TMD-STF damper

045010

Li, Xiaozheng / Ma, Yongxian / Wu, Chuang / Wang, Youzhan / Zhou, Shoujun / Gao, Xing / Cao, Chongjing

A fast actuated soft gripper based on shape memory alloy wires

045011

Aboutalebi, Reza / Eshaghi, Mehdi

Flutter analysis of laminated fiber-reinforced magnetorheological elastomer sandwich plate resting on an elastic foundation using an improved first_order shear deformation theory

045026

Duncan, Olly / Bailly, Nicolas / Laird, Katie / Shivkumar, Maitreyi / Bowman, Tom / Goff, John Eric / Scarpa, Fabrizio

Focus on smart materials and structures for sporting protective equipment

040401

Narayanan, P. / Pramanik, R. / Arockiarajan, A.

Hard magnetics and soft materials—a synergy

043001

Liu, Xiaohui / Tao, Yan / Jia, Hexuan / Dai, Fuhong

Harnessing multi-stable piezoelectric systems for enhanced wind energy harvesting

045024

Lan, Xingzi / Chen, Xinyu / Chen, Xin / Fan, Hao / Zheng, Hehui / Wang, Han / Tang, Yadong

High-efficient and intelligent antibacterial face mask integrated with airflow-temperature dual-function sensors for respiratory monitoring and disease prevention

045002

Masana, Ravindra / Dalaq, Ahmed S. / Khazaaleh, Shadi / Daqaq, Mohammed F.

The Kresling origami spring: a review and assessment

043002

Chen, Chung-De / Shen, Yu-Jie / Chou, Ping-Yi / Wang, Po-Hao

A Lamb-wave based SHM for multi-damage localizations in large composite plates by using piezoelectric transducer array

045028

Wang, Jiawen / Zhou, Lilin / Fan, Caizhi

A machine learning-based method for co-design and optimization of microwave-absorbing/load-bearing multifunctional structures

045023

Wu, Lifan / Dong, Xiaomin / Yang, Baolin

Magnetorheological variable stiffness and damping flexible joint with cam working surface for industrial robot

045013

Wang, Jiajin / Xu, Baoguo / Lai, Jianwei / Wang, Xin / Lu, Ye / Hu, Cong / Li, Huijun / Song, Aiguo

Model-based linear control of nonlinear pneumatic soft bending actuators

045022

Gao, Zhiwen / Guo, Juanjuan / Zhang, Yuhao / Zhou, Zhiwen / Zhang, Cennan / Li, Hua / Chen, Bin / Wang, Jizeng

Multilayer modeling framework for analyzing thermo-mechanical properties and responses of twisted and coiled polymer actuators

045031

Shabani, Majid

Numerical and experimental assessment of tilted-helical fiber orientation effects on deformation of pneumatic soft actuators

045034

Cao, Liang / Gong, S. G. / Tao, Y. R. / Duan, S. Y.

Optimizing dispensing performance of needle-type piezoelectric jet dispensers: a novel drive waveform approach

045001

Khazaaleh, Shadi / Dalaq, Ahmed S. / Daqaq, Mohammed F.

An origami-inspired energy absorber

045029

Liu, Xiao-Xiao / Xu, Yang-Bing / Han, Chen / Zhang, Feng

Performance analysis of electrical signal output of multi-state flexoelectric structures with parameter uncertainties through quasi-Monte Carlo method

045019

Mu, Tong / Jia, Fei / Zhao, Wei / Liu, Yanju / Leng, Jinsong

A phase-transition model of reprocessible thermadapt shape memory polymer

045007

Wiener, Thomas / Offenzeller, Christina / Martetschläger, David / Wimmer, David / Spirowski, Thomas / Jakoby, Bernhard

Phenomenological studies on magnetic and mechanical remanence effects in magnetorheological fluids

045004

Huang, Tianxiang / Dong, Tianyu / Yuan, Shenfang

A piecewise inverse finite element method for shape sensing of the morphing wing fishbone

045030

Benhemou, Aya / gibus, david / Huguet, Thomas / Morel, Adrien / Demouron, Quentin / Saint-Martin, Camille / Roux, Émile / Charleux, Ludovic / Badel, Adrien

Predictive lumped model for a tunable bistable piezoelectric energy harvester architecture

045033

Zou, Xuexue / Zhu, Ruijian / Chen, Xing / Ran, Qianping / Wang, Zengmei

PVDF piezoelectric sensor based on solution blow spinning fibers for structural stress/strain health monitoring

045006

Han, Yuhang / Wang, Chensheng / Sun, Lei / Wang, Hongxin / Yang, Bowen / He, Lipeng

Research on a rotary piezoelectric energy harvester based on movable magnets

045020

Cao, Teng / Wen, Zhiyi / Wang, Boquan / Yang, Yaqing / Li, Xiaoniu / Wu, Dawei

Theoretical modeling and experimental investigation of carbon fiber reinforced plastic-based piezoelectric actuator

045032

Peng, Xin / Ma, Chenglong / Yuan, Luhao / Dai, Donghua / Zhu, Dehui / Wu, Meiping

Understanding the role of laser processing parameters and position-dependent heterogeneous elastocaloric effect in laser powder bed fused NiTi thin-walled structures

045003

Pu, Huayan / Liu, Jun / Wang, Min / Ding, Jiheng / Luo, Jun / Sun, Yi

Vibration control of giant electrorheological damper combining nonlinear fractional-order controller and extended state observer

045016

Anzeige

Smart Materials and Structures - v. 33, n. 4 (März 2024)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Smart Materials and Structures - v. 33, n. 4 (März 2024)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.